🔥Buy 1 Get 1 Free🔥Brake Bleeder Hose - One Way Check Valve Tube Bleeding Tool Kit For Car Motorcyle Clutch

Material: Aluminum body to resist corrosion from brake fluid, using soft tube for easy releasing or loosen

One Way Check Valve: Prevents air being drawn into the system

Easy to connect: Simply and easy to connect with the clips to car motorcycle clutch for bleeding.

Easy to bleed: Bleed car motorcycle brakes fluid fastly with this brake bleeder hose.

Remark: This car motorcycle brake bleeder kit looks simple, but really a good helper to get the brake fluid out.

Step1: Open

1. Open the brake bleeder nipple of the caliper

Step2: Connect the Hose

1. Place one end of the hose onto the bleed nipple and secure with hose clip(only recommend)

2. Remark: Please refer to the picture, and pay attention to the one way valve direction, as there is a mark on the aluminum body which is showing the brake fluid flowing dirction, the direction of arrow on the valve should be away from the caliper

Step 3. Release and start press the brake Lever

3.1 Loose the brake bleeder Screw a little

3.2 Start pressing the brake Lever SLOWLY

3.3 Check until all air bubble has been flushed out

3.4 Make sure the fluid level in the mastercylinder reservoir is not too Low ,and fill